ARINC 818 (FC-AV)

OVERVIEW:

ARINC 818 empowers high-bandwidth, low-latency, uncompressed digital video transmission. The standard has been advanced by ARINC and the aerospace community where high performance is mission critical. Its adoption by major aerospace and military programs since 2006 has established it as the proven, de facto standard for such systems, which include infrared and other wavelength sensors, optical cameras, radar, flight recorders, map/chart displays, synthetic vision, image fusion systems, head-up displays, head-down multifunction displays including large area displays, and video concentrators.

ARINC 818 FRAME GRABBER, GENERATION AND CONVERSION UP TO 8 GBPS

664SWITCH<br />

VELOCITY

  • Up to 15 ICDs
  • PCIe Gen3 x8 interface
  • 4K ultra high-resolution
  • 3 ARINC 818 functions:
    • Receiver
    • Transmitter
    • Converter

 

ARINC 818 FRAME GRABBER, GENERATION AND CONVERSION UP TO 10 GBPS

Velocity-XI

VELOCITY XI

  • Implement a new ICD in under a minute
  • ARINC 818 receiver/transmitter
  • Conversion from ARINC 818 to DVI for standard resolutions
  • Compatible with all the features of the Velocity Test Application
  • Create your own library of ICD to cover all your ARINC 818 programs

ARINC 818 FRAME GRABBER 2 RECEIVER CHANNELS

Velocity-Dual-Channel

VELOCITY DUAL CHANNEL

  • Velocity Dual Channel is a new generation of high bandwidth multi-channel frame grabber that capture from 2 video sources simultaneously.
  • This card adds the power of the PCIe Gen3 x8 interface coupled with 2 high-speed DDR3 memory banks and 2 ARINC 818 receiver channels.
  • The ARINC 818 video streams can be completely asynchronous of each other but must be the same ICD. Both ARINC 818 streams can be captured simultaneously to a host computer memory via PCIe DMA transfers. If desired, the user can select one of the ARINC 818 streams to be routed to DVI TX.
  • The ARINC 818 TX can be set to either transmit a test pattern or echo out the individual ARINC 818 receiver channels.

ARINC 818 VIDEO STREAM GENERATOR

KEY FEATURES:

  • Link rates up to 10.0 Gb/s
  • Fine tuning of ICD parameters: line & frame timing, and blanking
  • Timing adjustments in real-time
  • Error injection options: SOFi, SOFn, EOFn, EOFt, IDLEs, CRC, Counters
  • Object 0 management

ARINC 818 CONVERSION STAND ALONE MODULE

HS SAM

  • ARINC 818 to/from DVI conversion
  • Rate : 1.0625, 2.125, 3.1875, 4.25 Gbps
  • Connectors : DVI ; fiber optic LC, copper FCN or high-speed Coax (HSC) ; USB 2.0
  • Form factor : aluminium housing, 18 x 10.5 x 3.3 cm
  • Operating temperature : 0-50°C
  • Power supply : 24VDC

SAM G3 ARINC 818 STAND ALONE CONVERTER MODULE

KEY FEATURES:

 

  • ARINC 818 to/from HDMI conversion
  • Rate : 1.0625, 2.125, 3.1875, 4.25, 5, 6.375, 8.5, 10 Gbps
  • Connectors : HDMI, SFP+ fiber optic LC 850nm (multimode) or 1310nm (single mode), USB Type C
  • ARINC 818 pixel types : RGB24, RGB565, Monochrome 8-bit
  • Form factor : aluminium housing, 16 x 11.5 x 6.3 cm
  • Operating temperature : 0-50°C
  • Power supply : 24VDC, or USB Type C 5V/3A
  • HDMI resolutions :
    • XGA (1024×768) @ 60Hz
    • SXGA (1280×1024) @ 60Hz
    • SXGA+ (1400×1050) @ 60Hz
    • WXGA (1440×900) @ 60Hz
    • UXGA (1600×1200) @ 60Hz
    • WXGA+ (1680×1050) @ 60Hz
    • HD (1920×1080) @ 60Hz/30Hz
    • 2K (2560×1440) @ 60Hz
    • 4K (3840×2160) @ 30Hz

ARINC 818 CONVERTER RUGGED FLYABLE

VCM VIDEO CONVERTER MODULE

VCM VIDEO CONVERTER MODULE

Features

A flight-hardened VCM can be ordered for any one of the following standard configurations:

  • DVI to ARINC 818
  • ARINC 818 to DVI
  • VGA to ARINC 818
  • ARINC 818 to VGA

In addition, custom analog conversions are also possible:

  • DVI to ARINC 818 over 75Ω coax
  • Ethernet to/from ARINC 818
  • SMPTE 292
  • Analog (e.g., STANAG 3350)
MULTI-CHANNEL VIDEO CONVERTER MODULE (MC-VCM)

MULTI-CHANNEL VIDEO CONVERTER MODULE (MC-VCM)

Formats:

  • Up to 6-channel conversion: ARINC 818 to/from other protocols (DVI/HDMI, Ethernet, 3G-SDI, NTSC/PAL, or HOTLink)
  • Up to 8-channel (8 in/8 out) ARINC 818 cross-point switching with options for 12×12

Features:

  • 6-channel video conversion to/from ARINC 818 and/or ARINC 818 to ARINC 818 switch (8×8)
  • ARINC 818 interface over 850nm fiber
  • Multi-ICD capabilities
  • Link rates up to 8.5 Gb/s
  • Supports mixed link rates on different channels
  • 28 VDC power input per MIL-STD-704F and RTCA DO-160G
  • HIRF protected, EMI shielded design
  • Command and control options via Ethernet, ARINC 429, and RS-485/422 interface
  • 50ms power hold up
  • Conduction and fan cooled options
  • Stale video monitoring and reporting
  • SEU monitoring and recovery

ARINC 818 EMBEDDED CONVERTER

Embedded-Boards

KEY FEATURES:

  • Firmware matched to the ICD project
  • Customizable form factor
  • External watch dog timer monitoring circuit
  • Reconfiguration time of less than 250 ms
  • SEU detection and recovery logic
  • Status discrete signals to identify normal operation and video stream faults
  • Stale image detection and annunciation logic
1 channel 2 channels 3 channel
Conversion ARINC 818 to DVI 1 channel DVI to ARINC 818
1 channel ARINC 818 to DVI		 2 channels DVI to ARINC 818
1 channel ARINC 818 to DVI
Power < 5W 7W < 8W
Dimensions 69 x 71mm 75 x 90mm 76 x 97mm
Connector SAMTEC 130 SAMTEC 130 SAMTEC 140
Fiber connector ARINC 801 or LC LC ARINC 801

ARINC 818 SWITCH

SPIDER

Key features

  • Link rates available : 1.0625, 2.125, 3.1875, 4.25, 6.375 Gbps
  • Optional test pattern (on demand)
  • ARINC 818 Supplement 2 compliant
  • Real-time link monitoring and error counter
  • Cmd/Ctrl by embedded SNMP or Web server
  • Low-latency switching
  • Unicast, multicast and broadcast
  • Operating temperature range : 0°C to 50°C
  • Storage temperature range : -55°C to 125°C
  • CE mark

 

Pantera specifications

  • Switch control 10/100BaseT Ethernet
  • 4 inputs and 4 outputs channels

ARINC 818 Video Protocol Analyzer

The ARINC 818 protocol analyzer is an essential key for the development of an ARINC 818 system. It checks the compatibility of the design according to the ARINC 818 standard. The VPA software application decodes and displays ARINC 818 data as well as errors. The VPA analyzes in detail the timing of the video stream and validates ADVB headers and containers. The VPA has a trigger function, a function for reading raw data, searching for data, automatic error checking.

VPAI

FEATURES

  • User configurable for multiple link rates: 1.0625, 2.125, 3.1875, 4.25, 5, 6.375 or 8.5 Gbps
  • Complex, multilayer triggering (up to three levels) within payload or Object 0
  • Pre- and post-trigger capture settings
  • Raw trace data captures up to 4 Gb, with save and load capability
  • Dockable user-friendly interface
  • Real-time monitoring of link status, such as Sync Link; SoF Detect
  • Live view of video
  • Raw data: view data in four-byte hex lines
  • Data search by selecting a predefined ordered set, such as SOFi, or entering a user-defined string
  • Data histogram
  • Link Status: assess the link health before data capture
  • Container details and ADVB frame details
  • Video resolution and timing
  • ADVB and container header decoding
  • Automatic error checking

    ARINC 818 IP CORE

    ARINC-818 IP Core

    The ARINC 818 Atomic IP Core is compile-time configurable to match the specific requirements of your ARINC
    818 video format. Features and supported formats include:

    Contact Sales
    LinkedIn
    LinkedIn