ARINC664 END SYSTEMS OVERVIEW:

ARINC 664 test instruments can be used in test and simulation applications that are required to transmit and receive data over the ARINC 664 avionics databus. Ours instruments use small form-factor pluggable transceivers (SFP) and support copper or fiber optic physical network interfaces. 

Using an FPGA based architecture, with multiple embedded processors, the ARINC 664 instruments provide onboard support for upper layer protocol processing (A653, UDP, IP) and utilize DMA to provide optimal data throughput. All ARINC 664 protocol operations, including VL traffic shaping, redundancy management, and IP fragmentation and reassembly, are handled onboard.

PCIe

KEY FEATURES:

  • Simulates multiple ARINC 664 End Systems, including VL traffic shaping and input VL redundancy management
  • Supports up to 4K Output VLs and 4K Input VLs
  • Supports up to 16K Sampling & Queuing output message ports and up to 16K input Sampling & Queuing message ports
  • IRIG‐B Time Synchronization
  • Provides network statistics including VL message counts and data rates
  • Automatic message sequencing & periodic data generated onboard
  • Capture and timestamp all transmitted Ethernet data with transmit loopback
  • Supports IEEE 802.3 10/100/1000 Mbit/s Full‐Duplex Ethernet links
  • Utilizes SFPs to support both copper and optical interfaces
  • Standard Ethernet operations simultaneous to ARINC 664 operations
  • Upper layer protocol handling (A653, UDP, IP) managed onboard
  • Provides DMA for high data rate applications
  • Time‐stamping of all received messages with 8 nS resolution
  • Optional “promiscuous” mode allows capture of all network traffic for protocol analysis and data logging applications
  • Windows, Linux, VxWorks and LabVIEW Real Time Drivers and APIs provided (other OS support on request)
  • Easy setup and configuration using  Flight Simulyzer software and ARINC 664 End System configuration tools

FORM FACTORS:

PXIe

XMC

PCI EXPRESS

PCI

ARINC 664 SWITCH OVERVIEW:

We also provides ARINC 664 Switching and interconnection solutions tailored to lab and development applications. ARINC 664 Switches for lab,  supporting optical and copper network interfaces.

664SWITCH<br />

KEY FEATURES:

  • Supports IEEE 802.3 10/100/1000 Mbit/s Full-Duplex Ethernet links
  • Sixteen (16) port non-blocking switch
  • Crossbar design, with 32 Gbps total transmit and receive bandwidth
  • Each port can operational at 10/100/1000 Mbps line rates
  • SFP interface supports RJ45 copper and optical connections
  • Traffic policing and filtering
  • 4096 Virtual Links configurable
  • BAG ranges of 0.5ms to 1600ms
  • Out of band access through Ethernet or serial port
  • Switch and port statistics available via snmp
  • Supports on-board storage of multiple configuration files
LinkedIn
LinkedIn